Applied Sciences

Adsorption is a consequence of surface energy distribution, and the existence of electrostatic bonding suggests that the presence of an external electric field may affect adsorbate/adsorbent interactions. Nevertheless, this aspect has been poorly studied in the literature, except under non-thermal plasma or corona discharge conditions. After having demonstrated in our previous work that the adsorption kinetics of gaseous organic compounds can be enhanced by the presence of an external applied electric field, in this study, we focus on the influence of the electric field on adsorbent and adsorptive interactions. By using a commercially available activated carbon cloth, in addition to increasing the adsorbent mass transfer coefficient by virtue of the increasing intensity of the applied electric field, the results suggest that adsorbent morphology is only influenced by the formation of new surface functional groups. Moreover, enhanced adsorption kinetics and capacity may result from t...

Awareness of the logic and context of original (and subsequent) design priorities is critical to informing decisions relating to valorisation, repair, refurbishment, energy retrofit or re-use of built heritage. A key benefit of collating data through Historic Building Information Modelling (HBIM) should be to assist others facing similar challenges. Here, examples for sharing understanding of how components belong to a system are outlined in the context of a newly completed dataset of public library buildings in the UK funded by Andrew Carnegie, predominantly built between 1900 and 1914. Demands for the functionality and economy of public library buildings, coupled with the emergent standardisation of building components at the time, provide a specific condition with potential for further iteration to other buildings of the period or related typologies. The work highlights the urgency of providing cost-efficient knowledge sharing structures in an era of altered priorities with respe...

This paper deals with optimal charging versus aging minimization for lithium-ion batteries. The optimal charging strategy proposed involves charging controllers whose design relies on a battery model. The model, especially designed for automotive battery management systems applications, is recalled in this paper. It provides the voltage response of a cell to an input current. It also models side reactions that produce degradation mechanisms and thus decrease battery performance. Side reaction modelling involves taking into account the temperature cell variations, which are thus also modelled. The association of the three above-mentioned sub-models leads to an electro-thermal battery aging model used to design an optimal charging strategy that simultaneously takes into account the minimization of charging time and maximization of battery lifetime. Thus, to achieve a charging controller that manages battery health, an appropriate charging trajectory was computed by solving an optimiza...

This paper examines the nature of traffic loading in recurrent congested traffic conditions on a long-span suspension bridge. Traffic flow and percentage of trucks are extracted from image data and a cluster analysis performed to classify the data into four clusters. One cluster (MTHF, medium truck percentage and high flow) is identified that incorporates almost 50% of the hours of traffic data scattered throughout the day. Site-specific load assessment confirms that this MTHF cluster is the most critical for the bridge considered, the Forth Road Bridge in Scotland. For non-recurrent congestion, another cluster (HTLF, high percentage of trucks and low flow) is shown to govern but this finding is highly site-specific, depending on the relative frequency of the different types of congestion. A comparison of the maximum hourly/daily MTHF load effect of the cable force for five notional bridges shows that a 100% increase in the bridge span generates an increase of about 65% in the chara...

Contamination of water sources by inappropriately disposed poorly treated wastewater from countryside establishments is a worldwide challenge. This study tested the effectiveness of retrofitting sand (Sa)- and gas–concrete (GC)-packed reactors with biochar (C) in removing turbidity, dissolved organic carbon (DOC), phosphate (PO43−), and total phosphorus (Ptot) from wastewater. The down-flow reactors were each intermittently loaded with 0.063 L/d for 399 days. In general, all reactors achieved <3 NTU (Nephelometric Turbidity Units) effluent turbidity (99% efficiency). GC reactors dominated in inlet PO43− (6.1 mg/L) and DOC (25.3 mg/L) reduction, trapping >95% and >60%, respectively. Compared to Sa (PO43−: 35%, DOC: 52%), the fortified sand (SaC) filter attenuated more PO43− (>42%) and DOC (>58%). Student t-tests revealed that C significantly improved the Sa PO43− (p = 0.022) and DOC (p = 0.034) removal efficacy. From regression analysis, 53%, 81%, and 85% PO43− sorptio...

Contamination of water sources by inappropriately disposed poorly treated wastewater from countryside establishments is a worldwide challenge. This study tested the effectiveness of retrofitting sand (Sa)- and gas–concrete (GC)-packed reactors with biochar (C) in removing turbidity, dissolved organic carbon (DOC), phosphate (PO43−), and total phosphorus (Ptot) from wastewater. The down-flow reactors were each intermittently loaded with 0.063 L/d for 399 days. In general, all reactors achieved <3 NTU (Nephelometric Turbidity Units) effluent turbidity (99% efficiency). GC reactors dominated in inlet PO43− (6.1 mg/L) and DOC (25.3 mg/L) reduction, trapping >95% and >60%, respectively. Compared to Sa (PO43−: 35%, DOC: 52%), the fortified sand (SaC) filter attenuated more PO43− (>42%) and DOC (>58%). Student t-tests revealed that C significantly improved the Sa PO43− (p = 0.022) and DOC (p = 0.034) removal efficacy. From regression analysis, 53%, 81%, and 85% PO43− sorptio...

Contamination of water sources by inappropriately disposed poorly treated wastewater from countryside establishments is a worldwide challenge. This study tested the effectiveness of retrofitting sand (Sa)- and gas–concrete (GC)-packed reactors with biochar (C) in removing turbidity, dissolved organic carbon (DOC), phosphate (PO43−), and total phosphorus (Ptot) from wastewater. The down-flow reactors were each intermittently loaded with 0.063 L/d for 399 days. In general, all reactors achieved <3 NTU (Nephelometric Turbidity Units) effluent turbidity (99% efficiency). GC reactors dominated in inlet PO43− (6.1 mg/L) and DOC (25.3 mg/L) reduction, trapping >95% and >60%, respectively. Compared to Sa (PO43−: 35%, DOC: 52%), the fortified sand (SaC) filter attenuated more PO43− (>42%) and DOC (>58%). Student t-tests revealed that C significantly improved the Sa PO43− (p = 0.022) and DOC (p = 0.034) removal efficacy. From regression analysis, 53%, 81%, and 85% PO43− sorptio...

In the present work we recall some improved versions of some general results flrst published in (14), concerning the functional equation g = g - f (g is a given function or operator, f being the "unknown" function, respectively operator). Further, we solve a special functional equation, when g(x) = x¡1dx;x > 0;d 2R;d > 1. The corresponding so- lution

The current perspective about urban development expects 70% of energy consumption will be concentrated in the cities in 2050. In addition, a growing density of people in the urban context leads to the need for increased security and safety for citizens, which imply a better lighting infrastructure. Smart solutions are required to optimize the corresponding energy effort. In developing countries, the cities’ lighting is limited and the lighting world map is strongly significant about the urban density of the different areas. Nevertheless, in territories where the illumination level is particularly high, such as urban contexts, the conditions are not homogenous at the microscale level and the perceived security is affected by artificial urban lighting. As an example, 27.2% of the families living in the city of Milan, ombardy Region, Italy, consider critical the conditions of lighting in the city during the night, although the region has diffused infrastructure. The paper aims to provi...

Background: Neurofibromatosis 1 (NF1) is an autosomal dominant genetic disorder. The expression of NF1 is extremely variable considering the broad spectrum of mutations affecting the gene(s) responsible for the pathology. Aim: To investigate the prevalence of oral manifestations in a group of children affected by neurofibromatosis type 1. Design: 100 pediatric patients, with genetically confirmed NF1 were enrolled in this study and matched to a total of 100 healthy children. Clinical examination was used to investigate: dental caries, dental abnormalities, periodontal health, neurofibromas, malocclusions, and enamel defects. Results: Mann Whitney’s test concerning prevalence of dental caries resulted in a no significant difference between the two groups (p = 0.90); a significant difference was highlighted as regards the other kinds of manifestations as well: enamel defects (p = 0.01), neurofibromas (p = 0.0043) and poor oral hygiene (p = 0.0002) with a higher prevalence of these fea...

The first step in identifying fruits on trees is to develop garden robots for different purposes such as fruit harvesting and spatial specific spraying. Due to the natural conditions of the fruit orchards and the unevenness of the various objects throughout it, usage of the controlled conditions is very difficult. As a result, these operations should be performed in natural conditions, both in light and in the background. Due to the dependency of other garden robot operations on the fruit identification stage, this step must be performed precisely. Therefore, the purpose of this paper was to design an identification algorithm in orchard conditions using a combination of video processing and majority voting based on different hybrid artificial neural networks. The different steps of designing this algorithm were: (1) Recording video of different plum orchards at different light intensities; (2) converting the videos produced into its frames; (3) extracting different color properties ...

The deformation of air bubbles in a liquid flow field is of relevant interest in phenomena such as cavitation, air entrainment, and foaming. In complex situations, this problem cannot be addressed theoretically, while the accuracy of an approach based on Computational Fluid Dynamics (CFD) is often unsatisfactory. In this study, a novel approach to the problem is proposed, based on the combined use of a shadowgraph technique, to obtain experimental data, and some machine learning algorithms to build prediction models. Three models were developed to predict the equivalent diameter and aspect ratio of air bubbles moving near a plunging jet. The models were different in terms of their input variables. Five variants of each model were built, changing the implemented machine learning algorithm: Additive Regression of Decision Stump, Bagging, K-Star, Random Forest and Support Vector Regression. In relation to the prediction of the equivalent diameter, two models provided satisfactory predi...

Building inspection systems are essential to optimise building maintenance. In the context of developing a global building inspection system, the lack of an expeditious tool to identify defects and their urgency of repair was detected. This study intends to propose an atlas of defects applicable to several types of building elements/materials, simplifying issues associated with the diagnosis of building pathology. A database was devised using previously developed components of the global inspection system: the classification list of defects and the urgency of repair parameters. Such a database was structured using several pages, each one with tables organised according to types of defects, building elements/materials and levels of urgency of repair (five-level scale—0–4). The atlas of defects has 38 pages in total, each for a different type of defect. The levels of urgency of repair are illustrated with photographs and described with concise classification criteria. Not all levels o...

This research provides a statistical analysis of the mechanical and physical properties of thermal insulating mortars developed in the laboratory and by the industry with and without the incorporation of nanomaterials. This was evaluated by carrying out a uni and bivariate analysis, principal components and factor analysis, cluster analysis, and the application of regression models. The results show that it is possible to find associations between these mortars’ properties, but also how these formulations’ development can be approached in the future to achieve better overall performance. They also show that the use of nanomaterials, namely silica aerogel, significantly improved the mortars’ thermal insulation capabilities, allowing us to obtain mortar formulations with thermal conductivities below the values presented by classic thermal insulating materials. Therefore, with this investigation, other researchers can support their product-development choices when incorporating nanomat...

Thermal mortars incorporating insulating aggregates are a possible solution to ensure good thermal performance and thermal comfort in buildings due to their low thermal conductivity coefficient. Under some circumstances, namely for particular in-service conditions in industrial applications and/or accidental actions (such as fire), it is important to quantify the retention of their properties after exposure to elevated temperatures, however this information is not yet available in the literature. This study aims to characterize the physical and mechanical behavior of thermal mortars incorporating expanded clay, granulated expanded cork and silica aerogel as aggregates after exposure to elevated temperatures. To this end, five types of mortars were produced in laboratory conditions—three thermal mortars, one reference sand mortar and one sand mortar with admixtures—and then exposed to different elevated temperatures (from 20 °C to 250 °C) in a thermal chamber. After thermal exposure,...

Municipal sewage sludge was subjected to a hydrothermal carbonization (HTC) process for developing a hydrochar with high adsorption capacity for water remediation in terms of dye removal. Three hydrochars were produced from municipal sewage sludge by performing HTC at 190, 220 and 250 °C, with a 3 h reaction time. Moreover, a portion of each hydrochar was subjected to a post-treatment with KOH in order to increase the adsorption capacity. Physicochemical properties of sludge samples, raw hydrochars and KOH-modified hydrochars were measured and batch adsorption studies were performed using methylene blue (MB) as a reference dye. Data revealed that both raw and modified hydrochars reached good MB removal efficiency for solutions with low MB concentrations; on the contrary, MB in high concentration solutions was efficiently removed only by modified hydrochars. Interestingly, the KOH treatment greatly improved the MB adsorption rate; the modified hydrochars were capable of capturing abo...

Covering spheroids (ellipsoids of revolution) by different spheres is studied. The research is motivated by packing non-spherical particles arising in natural sciences, e.g., in powder technologies. The concept of an ε -cover is introduced as an outer multi-spherical approximation of the spheroid with the proximity ε . A fast heuristic algorithm is proposed to construct an optimized ε -cover giving a reasonable balance between the value of the proximity parameter ε and the number of spheres used. Computational results are provided to demonstrate the efficiency of the approach.

This study focuses on the structural analysis of the front single-sided swingarm of a new three-wheel electric motorcycle, recently designed to meet the challenges of the vehicle electrification era. The primary target is to develop a swingarm capable of withstanding the forces applied during motorcycle’s operation and, at the same time, to be as lightweight as possible. Different scenarios of force loadings are considered and emphasis is given to braking forces in emergency braking conditions where higher loads are applied to the front wheels of the vehicle. A dedicated Computer Aided Engineering (CAE) software is used for the structural evaluation of different swingarm designs, through a series of finite element analysis simulations. A topology optimization procedure is also implemented to assist the redesign effort and reduce the weight of the final design. Simulation results in the worst-case loading conditions, indicate strongly that the proposed structure is effective and prom...